AluPlate™ fit-from-below

AluPlate™ fit-from-below - Allows the system to be installed from below after the floor has been laid. This could be either during construction or as part of a renovation where access from below is available.

AluPlate™ fit-from-below plates are versatile and allow for all joist spacings, letting you install single, double, and triple pipe runs, maximising design and performance.

The AluPlate™ fit-from-below system almost fully encapsulates our 16mm pipe, providing excellent surface contact and subsequent system output. The system is fixed firmly to the floor deck above,and does not affect floor height. The deck itself can incorporate any floor covering.

AluPlate™ fit-from-below plates can also be used in a sprung floor system where battens are used to support the plate.

AluPlate™ fit-from-belowAluPlate™ fit-from-belowAluPlate™ fit-from-below

Key system characteristics:

  • Simple installation
  • Suitable for all joist spacing and materials
  • New build or retrofit option
  • Excellent pipe and floor deck contact for optimum performance
  • Zero floor height addition
  • Versatile pipe layout and pipe density
Read our case studyQuantum controls
AluPlate™ fit-from-below

Get your underfloor heating quote today

Send us a photo of your plans and get your quote back in 3 hours - ask for FastTrack.